Showing 1–16 of 64 results
2-APH-A-F-R
Approximate Weight Lb: 7
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Flanged (holes are slotted to accommodate ANSI B16.5 and DN PN10/16 flange mount dimensions)
Dimension A In: '2
Dimension B In: '8.63
Dimension C In: '5.5
Dimension D (in): '6
Dimension E In: '6.75
Flame Insect Screen: 30 mesh Corrosion resistant for ignition protection Easily accessible for maintenance Design allows for closing option with screen in place
Float: High Density Polyethylene (Hdpe) Full Round
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum
Max Inlet Air Speed Mpers: '12.4
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Units Per Package: 1
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-APH-A-F-R-C
Approximate Weight Lb: 7
Closing Device Option: Closing Device
Compliances: ABS
Connection: Flanged (holes are slotted to accommodate ANSI B16.5 and DN PN10/16 flange mount dimensions)
Dimension A In: '2
Dimension B In: '8.63
Dimension C In: '5.5
Dimension D (in): '6
Dimension E In: '6.75
Flame Insect Screen: 30 mesh Corrosion resistant for ignition protection Easily accessible for maintenance Design allows for closing option with screen in place
Float: High Density Polyethylene (Hdpe) Full Round
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum
Max Inlet Air Speed Mpers: '12.4
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Units Per Package: 1
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-APH-A-T-R
Approximate Weight Lb: 7
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Threaded
Dimension A In: '2
Dimension B In: '8.63
Dimension C In: '5.5
Dimension D (in): '6
Dimension E In: '6.75
Flame Insect Screen: 30 mesh Corrosion resistant for ignition protection Easily accessible for maintenance Design allows for closing option with screen in place
Float: High Density Polyethylene (Hdpe) Full Round
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum
Max Inlet Air Speed Mpers: '12.4
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Units Per Package: 1
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-APH-A-T-R-C
Approximate Weight Lb: 7
Closing Device Option: Closing Device
Compliances: ABS
Connection: Threaded
Dimension A In: '2
Dimension B In: '8.63
Dimension C In: '5.5
Dimension D (in): '6
Dimension E In: '6.75
Flame Insect Screen: 30 mesh Corrosion resistant for ignition protection Easily accessible for maintenance Design allows for closing option with screen in place
Float: High Density Polyethylene (Hdpe) Full Round
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum
Max Inlet Air Speed Mpers: '12.4
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Units Per Package: 1
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-F
Approximate Weight Lb: '12
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-F-C
Approximate Weight Lb: '12
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-F-P
Approximate Weight Lb: '12
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-F-P-C
Approximate Weight Lb: '12
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-S
Approximate Weight Lb: 9
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-S-C
Approximate Weight Lb: 9
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-S-P
Approximate Weight Lb: 9
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-S-P-C
Approximate Weight Lb: 9
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-T
Approximate Weight Lb: 9
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-T-C
Approximate Weight Lb: 9
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-T-P
Approximate Weight Lb: 9
Closing Device Option: None (Standard)
Compliances: ABS
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
2-PM1-A-T-P-C
Approximate Weight Lb: 9
Closing Device Option: Closing Device Innovative design is simple and cost effective
Compliances: ABS
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '5
Dimension D (in): '6.38
Dimension E In: '6
Dimension F In: '2
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '95
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '42
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '2 In
Standard Size A In: '2
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
