Showing 1–16 of 940 results
1.5-PM1-A-F
Approximate Weight Lb: 8
Closing Device Option: None (Standard)
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-F-C
Approximate Weight Lb: 8
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-F-P
Approximate Weight Lb: 8
Closing Device Option: None (Standard)
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-F-P-C
Approximate Weight Lb: 8
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Flanged
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-S
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-S-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-S-P
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-S-P-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Socket Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-T
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-T-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-T-P
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-T-P-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Threaded
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-W
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Butt Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-W-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Butt Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Stainless Steel (Standard) Full Round Seamless Polished Stainless Steel Float Assures A Positive Seal
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-W-P
Approximate Weight Lb: 5
Closing Device Option: None (Standard)
Connection: Butt Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
1.5-PM1-A-W-P-C
Approximate Weight Lb: 5
Closing Device Option: Closing Device Innovative design is simple and cost effective
Connection: Butt Weld
Construction: Four (4) guide ribs to assure proper sealing Recessed cap; eliminates catch points Investment casting allows for higher accuracy and repeat ability during the casting process
Dimension C In: '4
Dimension D (in): '4.75
Dimension E In: '5
Dimension F In: '1.5
Dimension G In: '0.5
Flame Insect Screen: Corrosion Resistant For Ignition Protection Easily Accessible For Maintenance
Float Option: Polyethylene
Flow Rate At 3 625 Psi Gpm: '56
Hardware: Stainless Steel
Material: Aluminum 535
Max Inlet Air Speed Mpers: '27
Minimum Order: 1
Nitrile Seal: Maximize Low Pressure Sealing Oil And Fuel Resistant
Package Type: Each
Pipe Size A In: '1.5 In
Standard Size A In: '1.5
Units Per Package: 1
Valve Cap: Eliminates need for a spacer ring and protective screen
Notes: Air Intake Tested With Polyethylene Float (Lightest Float) And The Water Pumped Through The Vent Check Valves For The Flow Rate.
