G-400-512 – 4″ Lasdrop Shaft Seal

G-400-512

Description

  • 4″ Shaft, 5 1/2″ Stern tube, Single water injection
  • The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing.
  • The Clamp/Pressure housing is secured to the shaft without the use of set crews preventing galling or damage to the shaft. 
  • Dual u-cup seals rotate on the shaft and are seated inside of the seal ring to prevent the passage of water to this point.

Additional information

Package Type

Each

Shaft Size In

'4

Stern Tube Od In

'5-1/2

Units Per Package

1

  • 4″ Shaft, 5 1/2″ Stern tube, Single water injection
  • The Gen II uses a 316-marine grade stainless steel spring to provide pressure to the seal surfaces. Together, the spring and seal ring rotate along with the shaft, and remain secured in the Clamp/Pressure housing.
  • The Clamp/Pressure housing is secured to the shaft without the use of set crews preventing galling or damage to the shaft. 
  • Dual u-cup seals rotate on the shaft and are seated inside of the seal ring to prevent the passage of water to this point.
WARNING: This Product Contains Lead Achemical Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm.